Brother NX 600 - Manual (Page 127)

Sewing the Various Built-In Decorative Patterns 121
3
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Shifting patterns
Satin stitches can be shifted to the left or right by
half the width of the pattern, allowing you to create a
step-shaped pattern. This is called a "step pattern".As
an example, the procedure for creating the following
pattern is described below.
a
Select the first pattern in the satin stitch group
.
b
Press the + key in the operation panel.
X The screen for selecting a pattern appears
again.
c
Select or to specify the direction in
which the next pattern is shifted.
X The next pattern selected is moved half a
width to either the right or the left.
d
Press the + key in the operation panel.
X The screen for selecting a pattern appears
again.
e
Select the next pattern.
X The patterns are combined.
f
Specify that the patterns will be sewn
repeatedly.
• For details, refer to "Repeat sewing patterns"
(page 117).
■ Examples of step patterns
F3dash-BrotherE_sgml.book Page 121 Friday, September 5, 2003 5:46 PM