Brother NX 600 - Manual (Page 18)

GETTING READY
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
12
Understanding the LCD Screens
The LCD screen, located on the front at the right of the sewing machine, displays the settings for the
selected stitch and error messages if operations are performed incorrectly.When the sewing machine is
turned on, the LCD comes on and the following screen appears.
a Presser foot that should be used
b Single or twin needle
c Selected stitch
d Stitch length (mm)
e Stitch width (mm)
f Upper thread tension
Memo
z For details on the error messages that appear when an operation is performed incorrectly, refer to "Error
messages" (page 146).
1
2
5
6
4
3
F3dash-BrotherE_sgml.book Page 12 Friday, September 5, 2003 5:46 PM