beautypg.com

Brother NX 600 User Manual

Page 150

background image

APPENDIX

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

144

The thread tension

is incorrect.

The upper thread was not threaded
correctly.

Correct the upper threading.

page 24

The bobbin thread is incorrectly
installed.

Correctly install the bobbin
thread.

page 22

The combination of fabric, thread
and needle is not correct.

Select a thread and needle that
are appropriate for the type of
fabric being sewn.

page 34

The presser foot holder is incorrectly
installed.

Correctly install the presser foot
holder.

page 39

The thread tension is incorrect.

Adjust the tension of the upper
thread.

page 53

A bobbin designed specifically for
this machine is not used.

Incorrect bobbins will not work
properly. Only use a bobbin
designed specifically for this
machine.

page 18

The fabric is

wrinkled.

The upper thread was not threaded
correctly, or the bobbin is incorrectly
installed.

Correctly thread the upper thread
and correctly install the bobbin
thread.

page 22,

page 24

The spool is incorrectly installed.

Correctly install the spool.

page 24

The combination of fabric, thread
and needle is not correct.

Select a thread and needle that
are appropriate for the type of
fabric being sewn.

page 34

The needle is bent or blunt.

Replace the needle.

page 35

If thin fabrics are being sewn, the
stitch is too long.

Shorten the stitch length or sew
with stabilizer material under the
fabric.

page 56

The thread tension is incorrect.

Adjust the tension of the upper
thread.

page 53

Stitches are

skipped.

The upper thread was not threaded
correctly.

Correct the upper threading.

page 24

The combination of fabric, thread
and needle is not correct.

Select a thread and needle that
are appropriate for the type of
fabric being sewn.

page 34

The needle is bent or blunt.

Replace the needle.

page 35

The needle is incorrectly installed.

Correctly install the needle.

page 35

Dust has accumulated under the
needle plate or in the shuttle.

Remove the needle plate cover
and clean the shuttle.

page 140

Symptom

Probable Cause

Remedy

Reference

F3dash-BrotherE_sgml.book Page 144 Friday, September 5, 2003 5:46 PM