Brother NX 600 - Manual (Page 102)

UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
96
Quilting
Sandwiching batting between the top and bottom
layers of fabric is called "quilting". Quilts can easily
be sewn using the walking foot and the quilting
guide.
a
Baste the fabric to be quilted.
b
Attach the walking foot.
• For details, refer to "Using the walking foot"
(page 40).
c
Select a stitch.
• For details, refer to "Selecting stitching" (page
66).
d
Place one hand on each side of the presser
foot, and then evenly guide the fabric while
sewing.
Note
z When sewing with the walking foot, sew at a
speed between slow and medium.
■ Using the quilting guide
Use the quilting guide to sew parallel stitches that
are equally spaced.
a
Insert the stem of the quilter into the hole at
the rear of the walking foot or presser foot
holder.
† Walking foot
† Presser foot holder
b
Adjust the stem of the quilter so that the quilt
guide aligns with the seam that has already
been sewn.
F3dash-BrotherE_sgml.book Page 96 Friday, September 5, 2003 5:46 PM