10 printing reports, Mfc settings and activity, Customizing the transmission verification report – Brother MFC-6800 User Manual
Page 86: Printing reports -1, Mfc settings and activity -1, See chapter 10, Printing, Reports.), Printing reports
10 - 1
P R I N T I N G R E P O R T S
10
10
Printing Reports
MFC Settings and Activity
Two reports require initial setup in the Menu table: Transmission Verification
Report and Activity Report Interval. For initial setup:
Press Menu/Set, 2, 4, 1 .
—OR—
Press Menu/Set, 2, 4, 2.
Customizing the Transmission Verification Report
You can use the Transmission Report as proof that you sent a fax. This report
lists the job number, time and date of transmission and whether the transmission
was successful (OK). If you select
ON
or
ON
+
IMAGE
, the report will print for
every fax you send.
If you typically send multiple faxes to the same destinations, you may need
more than the job numbers to know which faxes you must send again. Selecting
OFF
+
IMAGE
will print a portion of the fax’s first page on the report to help
you remember.
1
Press Menu/Set, 2, 4, 1.
2
Press
to select
OFF
,
OFF
+
IMAGE
,
ON
or
ON
+
IMAGE
,
and then press Menu/Set.
3
Press Stop/Exit.
Note
When the feature is
OFF
, the report prints only if a transmission error
prevented delivery (NG).
1.TRANSMISSION
2.ACT. INTERVAL
1.TRANSMISSION
or