Brother MFC-6800 - Manual (Page 53)

I N I T I A L S E T U P 4 - 5
Turning On Automatic Daylight Savings Time
You can set the MFC to change automatically for Daylight Savings Time. It will
reset itself forward one hour in the Spring and back one hour in the Fall.
1
Press Menu/Set, 1, 5.
2
Press to select ON (or OFF ),
and then press Menu/Set.
3
Press Stop/Exit.
Toner Save
You can conserve toner using this feature. When you set Toner Save to ON ,
print appears somewhat lighter. The default setting is OFF .
1
Press Menu/Set, 1, 6.
2
Press to select ON (or OFF ), and
then press Menu/Set.
3
Press Stop/Exit.
Sleep Mode
Setting the Sleep Mode reduces power consumption while the machine is idle.
You can choose how long the MFC is idle (from 00 to 99 minutes) before it
drops into sleep mode. The timer automatically resets itself after the machine
receives a fax or PC data, or makes a copy. The default setting is 0 minutes.
1
Press Menu/Set, 1, 7.
2
Use the Dial pad to enter the length of
time the machine is idle before it drops
into sleep mode (00 to 99 minutes),
and then press Menu/Set.
3
Press Stop/Exit.
Setting Tone/Pulse Dialing Mode (For Canada Only)
Your MFC comes set to accommodate tone (multi-frequency) dialing service. If you
have pulse (rotary) dialing service, you need to change the dialing mode.
1
Press Menu/Set, 1, 8.
2
Press to select TONE or PULSE ,
and then press Menu/Set.
3
Press Stop/Exit.
5.AUTO DAYLIGHT
or
6.TONER SAVE
or
7.SLEEP MODE
8.TONE/PULSE
or