Brother MFC-6800 - Manual (Page 30)

2 - 2 A S S E M B L Y A N D C O N N E C T I O N S
Choosing a Location
Place your MFC on a flat stable surface, such as a desk. Select a place that is
free of vibration and shocks. Place the MFC near a telephone jack and a
standard, grounded power outlet. Choose a location where the temperature
remains between 50°F and 90.5°F (10°–32.5°C).
WARNING
■
Use caution when installing or modifying telephone lines. Never touch telephone
wires or terminals that are not insulated unless the telephone line has been
disconnected at the wall jack. Never install telephone wiring during a lightning storm.
Never install a telephone jack in a wet location unless the jack is specifically designed
for a wet location.
■
Lightning and power surges can damage this product! We recommend that you use a
quality surge protection device on the AC power line and on the telephone line, or
unplug the lines during a lightning storm.
■
For PLUGGABLE EQUIPMENT, the socket-outlet should be installed near the
equipment and should be easily accessible.
■
To reduce the risk of shock or fire, use only a No. 26 AWG or larger
telecommunication line cord.
Avoid placing your MFC in a high-traffic area. Do not place near heaters, air
conditioners, water, chemicals, or refrigerators. Do not expose the MFC to
direct sunlight, excessive heat, moisture, or dust. Do not connect your MFC to
electrical outlets controlled by wall switches or automatic timers. Disruption of
power can wipe out information in the MFC’s memory. Do not connect your
MFC to electrical outlets on the same circuit as large appliances or other
equipment that might disrupt the power supply. Avoid interference sources,
such as speakers or the base units of cordless phones.
NO ! NO ! NO !