Brother MFC-6800 - Manual (Page 50)

4 - 2 I N I T I A L S E T U P
Setting Station IDs
You can store your name, fax number, and telephone number to be printed on
all fax pages that you send. (See
Composing Electronic Cover Page , page 6-8.)
1
Press Menu/Set, 1, 3.
2
Enter your fax number (up to 20 digits),
and then press Menu/Set. You must
enter a fax number to proceed.
3
Enter your telephone number (up to 20
digits), and then press Menu/Set.
If your telephone number and fax number
are the same, enter the same number again.
4
Use the dial pad to enter your name (up to
20 characters), and then press Menu/Set.
(See
Entering Text, below.)
5
Press Stop/Exit.
The LCD returns to the date and time.
Entering Text
When you are setting certain functions, such as the Station ID, you may need to
type text into the MFC. Most number keys have three or four letters printed
above them. The keys for 0, #, and don’t have printed letters because they are
used for special characters.
By pressing the appropriate number key repeatedly, you can access the character
you want.
The telephone number you enter is used only for Cover Page features.
(See
Composing Electronic Cover Page , page 6-8.)
If your Station ID has already been programmed, the LCD prompts “1” to make
a change, or “2” to exit without changing.
Press Key one time two times three times four times
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S
8 T U V 8
9 W X Y Z
3.STATION ID
FAX:
ENTER & SET KEY
TEL:
ENTER & SET KEY
NAME:
ENTER & SET KEY