Brother MFC-6800 - Manual (Page 55)

S E T U P R E C E I V E 5 - 2
To Select or Change Your Receive Mode
1
Press Receive Mode. The LCD shows your active setting.
2
Continue to press Receive Mode until your new selection appears. After two
seconds, the LCD returns to the date and time and shows the new Receive Mode.
Setting Ring Delay
The Ring Delay setting determines the number of times the MFC rings before it
answers. If you have extension phones on the same line as the MFC, or are using
the telephone company’s Distinctive Ring service, keep the Ring Delay default
setting of 04. You can try increasing the Ring Delay to 05 rings; however, if you
do not receive all your faxes, you must reset it to 04 rings. (See
Easy Receive ,
page 5-3 and Operation from Extension Telephone , page 5-4.)
1
Press Menu/Set, 2, 1, 1.
2
Press to select how many times the
line rings before the MFC answers (00–05), and then press Menu/Set. If you
select 00, the line doesn’t ring at all.
3
Press Stop/Exit.
If you are changing the Receive Mode while in another operation, the LCD
returns to that operation.
FAX ONLY
MANUAL
EXT.TEL/TAD
CURRENT RECEIVE MODE
1.RING DELAY
or