Ipv6, Ethernet (wired network only) – Brother MFC-8870DW User Manual
Page 87
Control Panel Setup
73
6
IPv6
This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6
protocol, select
On.
The default setting for IPv6 is
Off
.
For more information on the IPv6 protocol, visit
1
(For Wired) Press Menu, 6, 1, 1, 0.
(For Wireless) Press Menu, 6, 2, 1, 0.
2
Press
▲
or
▼
to select
On
or
Off
.
3
Press OK.
4
Press Stop/Exit.
Note
After you select IPv6
On
, this setting will be applied to both the wired and wireless LAN interfaces.
Ethernet (Wired network only)
Ethernet link mode. Auto allows the print server to operate in 100BASE TX full or half duplex, or in 10BASE
T full or half duplex mode.
100BASE TX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BASE T Full Duplex (10B-FD) or Half
Duplex (10B-HD) fix the print server link mode. This change is valid after the print server has been reset
(default is
Auto
).
Note
If you incorrectly set this value, you may not be able to communicate with your print server.
1
Press Menu, 6, 1, 2.
2
Press
▲
or
▼
to select
Auto/100B-FD/100B-HD/10B-FD/10B-HD
.
3
Press OK.
4
Press Stop/Exit.