Brother MFC-8870DW - Manual (Page 41)

27
3
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as an APIPA device in the BRAdmin Professional utility screen.
• You can find the node name and IP address by printing the Network Configuration List. See Printing
the Network Configuration List on page 88 for information on how to print the Network Configuration
List on your print server.
Using the control panel to configure your machine for a network
You can configure your machine for a network using the control panel LAN menu. See Control Panel Setup
on page 67.
Using other methods to configure your machine for a network
You can configure your machine for a network using other methods. See Other ways to set the IP address
(for advanced users and administrators) on page 140.