Brother MFC-8870DW - Manual (Page 79)

Wireless configuration for Macintosh ®
65
5
14
If your network is configured for Authentication and
Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must
ensure that it is configured to match the
Authentication and Encryption settings of your
existing wireless network. Choose the
Authentication Method and Encryption Mode
from the pull-downs in each setting box. Then enter
the Network key and click Next. Go to step 16.
Note
• If you want to set more than one WEP key, click Advanced.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.
15
Enter a new SSID and choose Authentication
Method and Encryption Mode from the pull-downs
in each setting box. Then enter the Network Key
and click Next.
Note
If you do not know the Authentication or Encryption settings for network, contact your network administrator.
16
Click Next. The settings will be sent to your
machine. The settings will remain unchanged if you
click Cancel.