Brother MFC-8870DW User Manual
Page 74
Wireless configuration for Macintosh
®
60
5
9
Refer to the instruction manual that came with your access point to set the SecureEasySetup
TM
mode
of your access point.
10
Put the machine in SecureEasySetup
TM
mode. Press 6, 2, 2, 2,
for
SecurEasySetup
and press OK.
Note
•
It will take approximately one minute for the LAN menu on the LCD to become available after the
machine restarts or is turned on.
•
If the LCD shows
Connection Error
, please try again.
11
Click Finish.
12
The configuration is finished. Relocate the machine to a location that is within range of your access point.
13
You have completed the wireless setup. If you would like to continue installing drivers and software
necessary for operating your device, select Start Here OSX from CD-ROM menu.