Brother MFC-8870DW - Manual (Page 105)

91
7
6
Close OK. Port Properties dialog appears.
7
Enter the IP address of the printer that you wish to print to and click OK.
For Windows NT ® 4.0 users
Installing the TCP/IP protocol
If you did not install the TCP/IP protocol during the installation of your Windows NT ® 4.0 system (either
workstation or server) follow these steps.
1
Go to the Start button, select Settings, and then Control Panel.
2
Run the Network applet by double clicking the Network icon and then click the Protocols tab.
3
Select Add, and double click TCP/IP Protocol.
4
Insert the requested disk(s), or CD-ROM, to copy the required files.
5
Click Close. The Windows NT ® 4.0 system will review protocol bindings and then you will see the TCP/IP
Properties dialog.
6
Configure the host IP address, subnet mask, and gateway address in that dialog. Consult your system
manager for these addresses.
7
Click OK to exit (your Windows NT ® 4.0 workstation or server will need to be re-booted).
Other sources of information
See Configuring your network printer on page 9 to learn how to configure the IP address of the printer.