Brother MFC-8500 - Manual (Page 75)

S E T U P S E N D 6 - 11
Setting Up Polling Transmit
Polling Transmit is when you set up your machine to wait with a document so
another fax machine can retrieve it.
1
Place the original face down in the ADF.
2
Press Menu, 2, 2, 7.
3
Press or to choose
POLLED TX:ON , and then press Set.
4
Press 1 to leave the originals waiting in
the document feeder—OR—Press 2 to
scan the document into memory.
5
Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings and
go to Step 6.
6
Press Fax Start.
Note
If you pressed 1 in Step 4, the original remains in the ADF until your machine
is polled. If you must use your machine before the polled transmit occurs, you
must cancel this job.
7 . P O L L E D T X
P O L L E D T X : O F F ?
S E L E C T <- -> & S E T
1 . D O C 2 . M E M O R Y