Brother MFC-8500 - Manual (Page 53)

I N I T I A L S E T U P 4 - 5
Setting the Ring Volume
1
Press Menu, 1, 4, 1.
2
Press or to select ( OFF , LOW ,
MED , or HIGH ) and press Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your machine is idle. You can turn the ring
OFF or you can select a ring volume level.
Press High or Low to adjust the volume level. With each key press, your
machine rings so you can hear the active setting as the LCD shows it. Each key
press changes the volume to the next setting. The new setting will remain until
you change it again.
Setting the Beeper Volume
You can set the beeper to LOW , HIGH or OFF . The default setting is LOW .
When the beeper is set to LOW or HIGH , the machine beeps every time you
press a key or make an error and when fax sending or receiving is finished.
1
Press Menu, 1, 4, 2.
2
Press or to select your setting.
3
When the LCD shows the setting you want, press Set.
4
Press Stop/Exit.
Setting the Speaker Volume
1
Press Menu, 1, 4, 3.
2
Press or to select your setting
( LOW , MED , HIGH or OFF ), and
then press Set.
3
Press Stop/Exit.
—OR—
If you are using Hook, you can adjust the speaker volume while dialing. You
can turn the speaker off or you can select a speaker volume level. The default
setting is the lowest volume.
Press High or Low to adjust the volume level. With each key press, the volume
changes as the LCD shows the active setting. The new setting will remain until
you change it again.
1 . R I N G
3 . S P E A K E R