Asus TS300-E3 - Manual (Page 64)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 4 4 2 - 4 4 2 - 4 4 2 - 4 4 2 - 4 4
To remove the power supply unit (PSU):
1. Remove the chassis cover. Refer to section “2.1.1 Removing the side
cover.”
2. Remove the front panel assembly. Refer to section “2.5.1 Removing
the front panel assembly.
3. Lay the chassis on a flat, stable
surface.
4. Locate the four screws on the
rear panel. Remove the screws
and set them aside.
5. Locate and remove the screws
that secure the PSU bracket to
the chassis.
6. Slide the bracket in the
direction of the arrow and
remove it from the chassis.