Onboard floppy controller [enabled, Serial port1 address [3f8/irq4, Serial port2 address [2f8/irq3 – Asus TS300-E3 User Manual

Page 113: Parallel port address [378, Parallel port mode [normal

A S U S T S 3 0 0 - E 3

5 - 2 7

5.4.5

Onboard Devices Configuration

Onboard Floppy Controller [Enabled]

Allows you to enable the onboard floppy disk drive controller.
Configuration options: [Disabled] [Enabled]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4] [2E8/IRQ3]

Serial Port2 Address [2F8/IRQ3]

Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Serial Port2 Mode [Normal]

Allows you to select the Serial Port2 mode.
Configuration options: [Normal] [IrDA] [ASK IR]

Parallel Port Address [378]

Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]

Parallel Port Mode [Normal]

Allows you to select the Parallel Port mode.
Configuration options: [Normal] [Bi-directional] [EPP] [ECP]

Parallel Port IRQ [IRQ7]

Allows you to specify the Parallel Port IRQ.
Configuration options: [IRQ5] [IRQ7]

Select Screen
Select Item

Change Option

General Help

F10 Save and Exit
ESC Exit

BIOS SETUP UTILITY

Advanced

Allows BIOS to Enable
or Disable Floppy
Controller

Configure W83627EHF-A Super IO Chipset

Onboard Floppy Controller

[Enabled]

Serial Port1 Address

[3F8/IRQ4]

Serial Port2 Address

[2F8/IRQ3]

Serial Port2 Mode

[Normal]

Parallel Port Address

[378]

Parallel Port Mode

[Normal]

Parallel Port IRQ

[IRQ7]

This manual is related to the following products: