beautypg.com

Asus TS300-E3 User Manual

Page 168

background image

6 - 4 2

6 - 4 2

6 - 4 2

6 - 4 2

6 - 4 2

C h a p t e r 6 : R A I D c o n f i g u r a t i o n

C h a p t e r 6 : R A I D c o n f i g u r a t i o n

C h a p t e r 6 : R A I D c o n f i g u r a t i o n

C h a p t e r 6 : R A I D c o n f i g u r a t i o n

C h a p t e r 6 : R A I D c o n f i g u r a t i o n

6.4.4

6.4.4

6.4.4

6.4.4

6.4.4

Creating a RAID 1 (Mirror) set

Creating a RAID 1 (Mirror) set

Creating a RAID 1 (Mirror) set

Creating a RAID 1 (Mirror) set

Creating a RAID 1 (Mirror) set

You can create two types of mirrored configuration using the LSI Logic
Configuration Utility: Integrated Mirroring (IM) or RAID 1-E. See section
6.1.1 for RAID definitions.

To create an RAID 1 set:

1.

From the R A I D P r o p e r t i e s

R A I D P r o p e r t i e s

R A I D P r o p e r t i e s

R A I D P r o p e r t i e s

R A I D P r o p e r t i e s screen, select the drives that you want

to include in the RAID 1 set.

For Integrated Mirrored array, select first the drive with data that you
want to retain. This drive will become the primary copy of the array.

• Integrated Mirrored array - Select a minimum of two drives
• RAID-1E - Select a minimum of four drives

The A r r a y

A r r a y

A r r a y

A r r a y

A r r a y label on top of the screen changes to IM or 1E depending

on the number of selected hard disk drives.

I n t e g r a t e d M i r r o r i n g

I n t e g r a t e d M i r r o r i n g

I n t e g r a t e d M i r r o r i n g

I n t e g r a t e d M i r r o r i n g

I n t e g r a t e d M i r r o r i n g

R A I D - 1 E

R A I D - 1 E

R A I D - 1 E

R A I D - 1 E

R A I D - 1 E

This manual is related to the following products: