Asus TS300-E3 - Manual (Page 60)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 4 0 2 - 4 0 2 - 4 0 2 - 4 0 2 - 4 0
To install the front I/O board:
1. Place the I/O board in the
bracket, component side up.
Secure the front I/O board to
the bracket with a screw.
2. Position the I/O board into the
bay with the component side to
the left (close to the HDDs).
Connect the I/O cables to the
connectors on the back of the
I/O board.
3. Insert the I/O board into the
bay until the bracket fits the
front edge of the bay.
4. Secure the I/O board bracket
with a screw.
U S B 2 . 0 c o n n e c t o r U S B 2 . 0 c o n n e c t o r U S B 2 . 0 c o n n e c t o r U S B 2 . 0 c o n n e c t o r U S B 2 . 0 c o n n e c t o r