Asus TS300-E3 - Manual (Page 118)

5 - 3 2 5 - 3 2 5 - 3 2 5 - 3 2 5 - 3 2 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
5.5.2 5.5.2 5.5.2 5.5.2 5.5.2 Hardware Monitor Hardware Monitor Hardware Monitor Hardware Monitor Hardware Monitor
CPU1 Temperature [xxxºC/xxxºF] CPU1 Temperature [xxxºC/xxxºF] CPU1 Temperature [xxxºC/xxxºF] CPU1 Temperature [xxxºC/xxxºF] CPU1 Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF]
MB Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF] MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select [Disabled] if you do not wish to
display the detected temperatures.
Use the down arrow key to display additional items.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
CPU1 Temperature.
Hardware Monitor
CPU1 Temperature [49ºC/120ºF]
MB Temperature [39ºC/102ºF]
CPU Fan1 Speed [5038RPM]
CPU Fan2 Speed [5045RPM]
Front Fan1 Speed [N/A]
Front Fan2 Speed [N/A]
Rear Fan1 Speed [N/A]
Rear Fan2 Speed [N/A]
Smart Fan Control [Enabled]
CPU1 Temperature [60]
MB Temperature [50]
VCORE1 Voltage [ 1.236V]
VCORE2 Voltage [ 1.258V]
3.3V Voltage [ 3.280V]
5V Voltage [ 5.010V]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
5VSB Voltage [ 4.980V]
VBAT Voltage [ 3.088V]
12V Voltage [11.749V]
BIOS SETUP UTILITY
Power
Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead. Configuration options: [Disabled]
[Enabled]