Asus TS300-E3 - Manual (Page 170)

6 - 4 4 6 - 4 4 6 - 4 4 6 - 4 4 6 - 4 4 C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n C h a p t e r 6 : R A I D c o n f i g u r a t i o n
2. After selecting the drives, press .
3. When prompted, select , then
press to create the RAID 0 set.
6.4.5 6.4.5 6.4.5 6.4.5 6.4.5 Creating a RAID 0 (Stripe) set Creating a RAID 0 (Stripe) set Creating a RAID 0 (Stripe) set Creating a RAID 0 (Stripe) set Creating a RAID 0 (Stripe) set
You can create a striped array using the LSI Logic Configuration Utility.
To create a RAID 0 set:
1. From the R A I D P r o p e r t i e s R A I D P r o p e r t i e s R A I D P r o p e r t i e s R A I D P r o p e r t i e s R A I D P r o p e r t i e s screen, select the drives that you want
to include in the RAID 0 set.
The A r r a y
A r r a y A r r a y A r r a y A r r a y label on top of the screen changes to IS (Integrated
Striping).