Brother QL-720NW - Manual (Page 8)

P-touch Template Command Reference
- 3 -
1. Using P-touch Template
1. Using P-touch Template
(1) Specify the printer settings.
Using the P-touch Template Settings tool, specify the initial
printer settings according to the host system environment
or the host that the printer is connected to.
(Please refer to “ 2. P-touch Template Settings Tool User’s
Guide ” on page 4.)
The printer driver must first be installed via a USB
connection.
(2) Design the template.
Using P-touch Editor, design the template to be transferred
to the printer.
(Please refer to “ 4. P-touch Template Limitations ” on page
13.)
(3) Transfer the templates.
Using P-touch Transfer Manager, transfer the templates to
the printer.
(Please refer to the QL series Software User’s Guide.)
(4) Program using P-touch Template commands.
If any special commands are required to control the printer,
change the host’s program in accordance with the P-touch
Template commands.
(Please refer to “ 6. Control Code Lists ” on page 23.)
(5) Connect the printer with the host and print slips etc.
Using a serial cable, connect the printer to the host device.
Transfer the data such as ASCII text from the host to
templates in the printer, and print the label etc.