2 character alignment – Brother QL-720NW User Manual

Page 19

P-touch Template Command Reference

- 14 -

4. P-touch Template Limitations

4.1.2 Character alignment



Horizontal alignment settings (“Justify” or “Equal Length”) specified in P-touch Editor are changed to the

left alignment setting.



The setting for line feed with a line feed specified with the P-touch Editor can be set between 0 and 255

dots.

A negative line spacing setting cannot be used in P-touch Editor. In addition, since there is an upper limit

(about 21 mm) for the line width with the printer, a line spacing setting larger than this limit specified in

P-touch Editor will not be applied on the printer.

Specifying the line spacing setting in P-touch Editor