Brother QL-720NW - Manual (Page 38)

P-touch Template Command Reference
- 33 -
7. Control Command Details
^LS Specify line spacing with line feed
ASCII: ^ L S n1 n2 n3
Decimal: 94 76 83 n1 n2 n3
Hexadecimal: 5E 4C 53 n1 n2 n3
Parameters
0≤n1≤2
0≤n2≤9
0≤n3≤9
Description
 Specifies the number of dots for the line spacing when a line feed is entered.
(n1*100)+(n2*10)+n3: Number of dots for the line spacing (0 to 255)
 The default number of dots for the line spacing when a line feed is entered is the number of dots
determined when the template is created in P-touch Editor.
 This command is a dynamic command.
Remarks
 The number of dots for the line spacing can be between 0 and 255. This command becomes invalid if any
other value has been specified.
1 dot=1/300 inch
1 dot≈0.085 mm
Example
 To set the line spacing to 10 dots:
^ L S 0 1 0
(5Eh 4Ch 53h 30h 31h 30h)