Brother QL-720NW - Manual (Page 64)

P-touch Template Command Reference
- 59 -
7. Control Command Details
ESC iXy2 Specify printer settings (cut options–specifying number of labels)
ASCII: ESC i X y 2 n1 n2 n3
Decimal: 27 105 88 121 50 n1 n2 n3
Hexadecimal: 1B 69 58 79 32 n1 n2 n3
Parameters
n1: 01h (Fixed)
n2: 00h (Fixed)
01h≤n3≤63h
Description
 Specifies that the tape will be cut after the specified number of labels. (If the auto cut setting is ON, the
tape will be cut after the number of labels specified with this setting.)
n3: Cuts after a specified number of labels (01h to 63h)
 This command is a static command.
Remarks
 The number of labels that can be set for the auto cut is between 1 and 99.
This command becomes invalid if any other value has been specified.
Example
 To cut after every five labels (However, the auto cut setting must be set to ON.):
ESC i X y 2 01h 00 05h
(1Bh 69h 58h 79h 32h 01h 00h 05h)