Brother MFC-9760 - Manual (Page 7)

Preparation and Simple Use Guide 1
PREP
ARA
TION
AND SIMPLE USE
Preparation and Simple Use
Guide
Steps to prepare and use the machine simply
Follow the steps below to prepare and use the machine simply.
However, before you perform these steps, see Important Safety Information (page 91), and
Advice for Preparation and Simple Use Guide (page 4).
1 Read the Quick Setup Guide
Follow the instructions on the Brother Quick Setup Guide to set up the machine.
2 Setting the Document
You can scan the document for copying from either the ADF (Automatic Document Feeder) or
from the glass platen.
Using the ADF (Automatic Document Feeder)
The automatic document feeder (ADF) can hold up to 50 pages, feeding each one individually
through the machine. Use standard (75 g/m
2
) paper when using the ADF. Always fan the pages
well before placing them in the feeder.
Recommended Environment
Temperature: 10-32.5˚C
Humidity: 20%-80%
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with
staples, paper clips, paste or tape attached. DO NOT use cardboard,
newspaper, or fabric. (To copy or scan this kind of document, see
Using
the Glass Platen , page 3.)
■ Make sure documents written with ink are completely dry.
■ Documents must be from 14.7 to 21.6 cm wide, and from 12.7 to 35.6 cm long.
Insert documents face up , top edge first .
Adjust the paper guides to fit the width of your pages.
1
2