Changing default settings, Copy mode (type of document), Is default – Brother MFC-9760 User Manual
Page 27
Making Copies
21
COPIER
Changing Default Settings
Press
Menu/Set
,
2
to change default settings for Copy mode. These settings will remain until you
change them again by pressing
Menu/Set
. Adjust the Copy Mode and Contrast and Paper Type
settings.
By pressing a number, you can adjust copy settings as shown in the following chart. Press
or
to move through the selections for each setting. Press
Menu/Set
to save your selection. Press
Stop
—OR—Press
to select the next setting you want to change.
Press
Menu/Set
, and
2
.
Copy Mode (Type of Document)
You can select the Copy resolution for your type of document. The default setting is AUTO, which
is used for documents that contain both text and photographs. TEXT is used for documents
containing only text. PHOTO is used for copying photographs.
1
Press
Menu/Set
,
2
,
1
.
2
Press
or
to choose the type of document (AUTO, TEXT or PHOTO), and then press
Menu/Set
.
3
Press
Stop
—OR—Press
or
for additional settings.
TEXT
1.COPY MODE
2.CONTRAST
– +
is default
AUTO
PHOTO
PLAIN
THICK
THICKER
3.PAPER TYPE
THIN