Sterlco SF1000 Gravimetric Additive Feeder - Manual (Page 18)

18
4.5 Process data parameters setup
4.5.1 Entering Process Data parameters in Mode "0"
 Enter Mode "0" Main Screen:
 Use to select "Shot Weight" value
and enter new shot weight value
 Press to activate new value
 Use to select "Desired" value and enter new MB/Additive desired value (%)
 Press to activate new value
4.5.2 Process Data parameters in Mode "1"

Enter Mode "1" Main Screen:
 Use to select "Shot Weight" value
and enter new shot weight value
 Press to activate new value
 Use to select "Desired" value and
enter new MB/Additive desired value (%)
 Press to activate new value
 Press key to enter Time setting screen
 Enter new screw feeding time
 Press to activate new value
 Press to return to Main screen
4.5. 3 Process Data parameters in Mode "2"

Enter Mode "2" Main Screen:
 Press key to enter Speed setting screen
 Enter new screw speed %
 Press to activate new value
 Press to return to Main screen