Sterlco SF1000 Gravimetric Additive Feeder - Manual (Page 15)

15
4.3.3 Main Screen for Mode "2" (Volumetric Mode)
 Shot Weight: Injected batch's weight,
including the cold runner (gr.)
 Desired: Desired MB/Additives %
 Actual: Measured MB/Additives %
 Machine time: Injection machine material
feeding time
 Speed: Motor Speed in % of max. rate, as manually set by operator
 Press
key to enter Speed selecting screen, to manually set constant Motor
Speed time
 Press key to enter Maintenance screen
 Press key to enter Fill/Empty screen
4.3.4 Main Screen for Mode "3" (Volumetric Mode, with constant SF-1000 feeding time)
a) Standard Volumetric Mode 3 (when screws 1-4 are selected)
 Shot Weight: Injected batch's weight,
including the cold runner (gr.)
 Desired: Desired MB/Additives %
 Actual: Measured MB/Additives %
 SF-1000 Time: Injection machine material
feeding time
 Speed: Motor Speed in % of max. rate, as manually set by operator
 Press key to enter Time/Speed selecting screen, to manually set Feeding Time
and Motor Speed
 Press key to enter Maintenance screen
 Press key to enter Fill/Empty screen
b) Micro Volumetric Mode 3 (when screw "0" is selected)
 Shot Weight: Injected batch's weight,
including the cold runner (gr.)
 Desired: Desired MB/Additive's %
 Actual: Measured MB/Additive's %
 Machine time: Injection machine material
feeding time
 Speed: Motor Speed in % of max. rate, as manually set by operator
 Press key to enter Rev/Speed selecting screen, to manually set motor
revolutions/shot and Motor Speed
 Press
key to enter Maintenance screen
 Press key to enter Fill/Empty screen