86037630 pgs 4-1 and 4-2, Maintenance - gas – Prochem Apex User Manual
Page 29

MAINTENANCE - GAS
APEX 86037630
4-1
* Or as often as required
** Change water pump crankcase oil after the first 50 hours
***Change engine crankcase oil and filter after the first 50 hours
****Perform drive belt, pulley and hub maintenance after the first 25 hours of operation, and then again at
100 hours
*****If using AEON PD synthetic lubricant, 4500 hours or every 2 years, whichever comes first
SERVICE SCHEDULE
Engine
Daily
Check engine oil level. *** Fill to proper level
Engine
Daily
Check coolant level in overflow bottle
Vacuum Pump
Daily
Spray WD-40 in lubrication cup at front of console for 5
sec.
Water Pump
Daily
Check oil level.** Fill to proper level
Solution Inlet Tube Strainer
Daily
Check strainer for blockage, remove any debris
Vacuum Inlet Filter (In Waste Tank)
Daily
Clean filter, inspect, replace if damaged
Vacuum Hoses
Daily
Wash out with clean water
Automatic Waste Pump
Daily
Inspect and remove any debris or sediment
Chemical Filter
Daily Inspect
daily
Vacuum Pump
Weekly*
Check oil level. Fill to proper level
Water Box Float Valve
Weekly
Check for proper seating and shut-off
Water Pump Inlet Filter
Weekly*
Check for debris and clean
Battery
Weekly*
Check for proper fluid level. Fill with distilled water only
Solution Outlet Y-Strainer
Weekly*
Inspect and remove any debris or blockage
Temperature Balance Orifice
Weekly
Remove, check, and clean
High Pressure Hoses
100 hrs
Inspect for damage or impending damage
Pressure Regulators
100 hrs
Lubricate o-rings
Engine
100 hrs
Change engine oil***
Engine
100 hrs
Change oil filter***
Engine
100 hrs
Check fan belt tightness
Battery
100 hrs*
Clean battery terminals
Float Valve Seal
200 hrs.
Replace seal
Engine
200 hrs
Service air cleaner elements*
Engine
200 hrs
Check radiator hoses and clamp tightness
Fuel Pump
200 hrs
Check hose connections
Engine
200 hrs
Check spark plugs for carbon deposits and proper gap
Flow Simulator And Chemical Valves
200 hrs
Inspect and/or adjust packing nuts