APC Smart-UPS VT - Manual (Page 33)

Maintenance – Parts Replacement
990-2282A-001 Smart-UPS® VT 10-40 kVA 400V, 208V, 200V – Operation 27
User interface (front).
 Network Management Card with temperature sensor: used for remote system control
and monitoring, e-mail notifications etc. For configuration and use, refer to the separate
user manual: Network Management Card with Environmental Monitor – shipped with the UPS.
 Computer-interface port for the connection of computers with APC Powerchute ® software.
 Internal Mechanical Bypass Lever: used to bypass the upstream utility/mains power around the UPS
to support the load directly = internal bypass operation. Not applicable in parallel systems.
 Service port (for APC maintenance personnel only).
 Display port for the connection of display communication cable .
 Parallel operation port.
 Documentation storage.
 Power Module.







