Dwyer Series PUB - Manual (Page 3)

I
Table of Contents
1: General Description 1
1.1 Introduction 1
1.2 Principles of Operation 2
1.3 Supplied Hardware 3
1.4 PUB Instrument 4
1.4.1 Connectors 4
1.4.2 Keypad 5
1.4.3 Power supply and battery charging
6
1.5 Transducers 6
2: Installation 7
2.1 Transducer Positioning 7
2.2 Transducer Attachment 8
2.2.1 Preparation 8
2.2.2 Attaching the transducer holders
8
2.2.3 Fitting the transducers 9
3: Operating Procedures 10
3.1 Setting-up the Instrument 11
3.1.1 Using the instrument for the first time 11
3.1.2 Enabling/disabling the backlight 12
3.2 Using the Quick Start Menu 13
3.3 Using the System at a Regularly Monitored Location 16
3.4 Managing Named Sites 18
3.4.1 Setting up a new site 18
3.4.2 Changing a site name 19
3.5 Instrument Calibration 19
3.5.1 Adjusting the zero cut-off 19
3.5.2 Adjusting the set zero flow offset 19
3.5.3 Adjusting the calibration factor 20
3.5.4 Adjusting the roughness factor 21
3.5.5 Adjusting the damping factor 22
3.6 Performing Monitoring Functions 23
3.6.1 How to measure totalized flows (manually) 23
3.6.2 How to stop the totalizer temporarily 24