Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 62)

Requesting Firmware Manually
If it was not set up to be done as an automatic work item, you can manually initiate a request for the firmware version from an
ORION Migratable or Fixed Network (in mobile mode) endpoint by performing the following steps
1 With the Current Reading tab selected on the Service Details screen, click the Firmware Version tab
OTEE: N “Not Required/Optional” displays at the top of the screen to indicate that an automatic work item was
not requested
Figure 68: Firmware Version tab without work items
2 Tap the Get Firmware Version button
Result: The Firmware version of the endpoint displays as shown in Figure 69.
Figure 69: Firmware Version received
OTEE: N If the route was created with ReadCenter Data, Firmware Version is view only
TWO-WAy COMMuNICATIONS
Page 62 April 2014 ORION® Meter Reading System (ORS)