Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 50)

Changing a Geocoded Entry
As meter readings are received, the software logs the latitude and longitude values of each meter reading The latitude and
longitude values can be changed, if needed, on the Service Details screen
1 With GPS on, drive slowly and stop as close as possible to the meter location
2 Click the Details button for the meter you want to change
Result: The Service details screen opens.
3 Select the Current Reading tab if it is not already selected
4 Click the Store Current Position button
Result: The latitude/longitude is stored for the meter location.
Figure 50: Store Current Position
Current
Reading tab
Store
Current
Position
Latitude/
Longitude
GeOCOdING MeTeR LOCATIONS
Page 50 April 2014 ORION® Meter Reading System (ORS)