Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 38)

SETTINGS
The Settings option on the main tool bar allows you to change the settings used by the software in its operations
Figure 40: Main tool bar with Settings option
OTEE: N A password is required to access and change the information on the Settings screen See the Settings description at
"Tool Bar" on page 15 for more information
When you click the Settings option on the main tool bar and enter the password, the Settings screen opens The Settings
screen has the following five tabs
• General
• Alerts
• Map
• Communications
• User Interface
MPORTANT I
When using an ORION mobile transceiver, always perform the steps below, in order, before you access settings:
1 Connect the mobile transceiver to the USB port on the laptop Connect it to the same USB port each time, if possible
2 Power on the mobile transceiver
If you access Settings without having the mobile transceiver attached and powered on, or you perform the steps in reverse
order, the COM port setting may be lost and would need to be reset Refer to "Communications Tab" on page 44
SeTTINGS
Page 38 April 2014 ORION® Meter Reading System (ORS)