Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities - Manual (Page 40)

Alerts Tab
The Alerts tab is used to set sounds and popups as audible and visual alerts for issues that occur during a route reading
When finished making changes to the settings on this screen, select OK and return to the reading cycle Select Cancel to
disregard any changes and return to the main menu
Figure 42: Settings screen - Alerts tab
OTEE: N The sounds and popup alerts are pre-set Badger Meter recommends keeping the pre-set alerts until the user
determines the best set up for an individual route
Display Service Popup
Comments
Comments display when the vehicle is within reading range of a meter Comments are
created by the reading data management software operator and passed to the meter reader
Examples: seasonal, bad dog or shut off water
Display Flashing Labels GPS and/or ORION endpoint labels flash on the main reading screen in map view and on the
Quick Read screen when their radio signals are not functioning
Enable Audible Alerts Alert sounds are heard as meter readings are received
OTEE: N If the enable Audible Alerts box is not checked, NO sounds are heard for ANY alerts
Show Popup Alert Popup alerts display based on the setting ORS controls the settings for Errors, Warnings and
Reads Popup alerts ALWAYS display for Errors and Warnings and NEVER display for Reads
To choose the setting for all other alerts, click the button to select Yes or No
Sound Played A unique sound plays for each alert Choose from a drop-down menu of available sounds
To hear the sound, click Play If you do not want a sound to play for an alert, select the blank
space on the drop-down menu
SeTTINGS
Page 40 April 2014 ORION® Meter Reading System (ORS)