Badger Meter ORION AMR/AMI Hardware Solutions for Gas Utilities User Manual
Page 43
Map Features
•
Display Velocity On Map When Geocoding Mode is on, this feature displays the current vehicle speed The
maximum speed for setting lat/longs is 15 mph See
"Geocoding Meter Locations" on page
for more information
•
Display Service
Information On Map
Displays an identifier for the account, such as the location or name, as determined by the
reading data management operator
•
Remove Normal Read
Services from Map
When a normal read is received, unread meter icons disappear from the screen rather
than changing to a green circle This includes manual reads
•
Remove Potential Leak
Services from Map
Icons for potential leak situations will not display on the map
•
Default Zoom Level
The number entered is used to set the zooming feature in Map View The setting returns
to this zoom level when Zoom Default is selected using the Map Control buttons in Map
View For additional information, refer to
•
Minor Road Cutoff
Zoom Level
The number entered is used to set the zooming level when major highways are shown
and minor road names drop off the map when Zoom Out is selected in Map View
Map Orientation
Choose how the map is displayed while reading meters by selecting from the drop-down menu
Starting Location The address shown on the map until the GPS antenna reports the current location of the vehicle
From then on, the map centers at the vehicle location Location may also be displayed as latitude/
longitude (lat/long) The location can be manually changed by typing in new information
OTEE:
N
If ORS does not detect a starting location, it uses the last known valid address to ensure the
route maps display appropriately An alert message displays when you start to read
the route
Entry/Exit Zones
These distances specify the entry and exit zone distances for determining when there is a missed
read If the mobile transceiver/receiver passes through the entry/exit zone for an endpoint without
receiving a reading, ORS records a “MISSED” alert for the endpoint
SeTTINGS
Page 43
April 2014
ORION® Meter Reading System (ORS)