West Control Solutions DataVU 5 - Manual (Page 84)

5 Setup program
84
5.5 Teleservice
You can use Teleservice to request the latest data from a paperless recorder. In
addition, the Modbus flag can be switched (activated).
In order to use Teleservice, there must be an existing connection to a device.
v Chapter 5.7 “Connection between the PC and the recorder”
You can switch Teleservice into or out of display via the Window menu.
Close Teleservice window
Click here to switch further registers
into the display (if available)
Active register
Click here to select the register as
the active register
Shift the Teleservice window
v “Shifting the toolbar” on page 80