West Control Solutions DataVU 5 - Manual (Page 56)

3 Operation and visualization
56
3.9 Entering values
The softkeys are also used to enter values in the instrument – the example
shows fine calibration being carried out.
The entry can be concluded with E or canceled with D .
H
The sign can only be altered if the value is not “0”. This means that
you cannot start the value entry with an alteration of the sign if the
current value is “0”.
Increase (+1) or
decrease (-1) selected
digit or change the sign
Select the digit to
be altered
Alter the number
of decimal places