West Control Solutions KS 40-1 Burner - Manual (Page 27)

6 Calibration level
g
Measured value correction (
CAL)
is only visible if ConF / InP.1 / Corr = 1
or 2 and qUIC = OFF is chosen.
The measured value can be matched in the calibration menu ( CAL). Two me-
thods are available:
Offset correction
( ConF/ InP.1 / Corr =1 ):
w possible on-line at the
process
2-point correction
( ConF/ InP.1 / Corr = 2 ):
w is possible off-line with
process value simulator
Calibration level
27 KS40-1 burner
X
standard setting
offset correction
InL.1
OuL.1 new
display
OuL.1
old
X
standard setting
2-point correction
InL.1 InH.1
OuL.1 new
OuH.1 new
display
OuH.1
old
OuL.1
old