Thermo Fisher Scientific CyberScan DO 300 - Manual (Page 35)

Instruction Manual DO 300
32
8.8 LCd: Adjusting LCD Brightness
This mode allows you to make adjustment to the
brightness of the backlit LCD. Selecting a dimmer
back-lighting level helps conserve batteries.
From measurement mode
1. Press SETUP key to enter SETUP mode.
2. Press MI/ or MR/ keys to scroll through main
groups until you view parameter “LCd” in the
upper display.
3. Press the ENTER key. A number (0 – 8) appears
in the upper display and “LCd” appears in the
lower display.
4. Press MI/ or MR/ keys to select from level 0
(dimmest light) to level 8 (brightest light).
5. Press the ENTER key to confirm selection and to
return to the main group menu. Press the
CAL/MEAS key to return to measurement mode.
Figure 30: Adjusting LCD
brightness