Thermo Fisher Scientific CyberScan DO 300 - Manual (Page 20)

Instruction Manual DO 300
17
8 ADVANCED SETUP FUNCTIONS
Your waterproof meter advanced SETUP mode lets you customize your meter parameters. It’s
menu features different main groups for various parameter preferences.
This meter will have two sets of SETUP mode; one set is when SETUP mode is entered from
% saturation or Clock mode (% saturation SETUP mode) and the other set is when SETUP is
entered from the mg/L (ppm) measurement mode (mg/L (ppm) SETUP mode). In each set,
only main groups which are applicable to the measurement mode you are in when you enter
SETUP mode will be featured.
The full selections of available main groups are:
1. CLR: Memory clear
2. dPr: Dissolved Oxygen parameters
3. OFS: % saturation offset adjustment -- % saturation SETUP mode only
4. CAL: Calibration data
5. ELE: Probe data
6. COF: Configuration
7. LCd: Brightness of Backlit display
8. CLO: Clock setting
9. rSt: Reset meter to factory default
IMPORTANT: The main groups selection numbering will change accordingly with
respect to the two sets of SETUP mode.
See Section17 on page 52 for more a detailed overview on the different parameters available
in % saturation mode and mg/L (ppm) mode.