Thermo Fisher Scientific CyberScan DO 300 - Manual (Page 23)

Instruction Manual DO 300
20
8.2 Clr: Memory Clear
Use this feature to clear all memory values when you
need to store a new series of values. This will avoid
confusing the old values with the new ones.
From measurement mode:
1. Press the SETUP key to enter SETUP mode.
2. Press MI/ or MR/ keys to scroll through main
groups until you view parameter “CLr” in the upper
display.
3. Press the ENTER key to enter parameter.
4. Press MI/ or MR/ keys to toggle between NO
and YES.
• NO retains current memory.
• YES clears all memory
5. Press the ENTER key to confirm selection and
return to the main group menu. Press the
CAL/MEAS key to return to measurement mode.
Figure 17 – Memory Clear