Thermo Fisher Scientific CyberScan DO 300 - Manual (Page 30)

Instruction Manual DO 300
27
6. Press the ENTER key. The upper display shows the 100%
saturation mV value.
7. Press the ENTER key. The upper display shows the 0%
saturation mV value.
8. Press the ENTER key to move back to main group “ELE”. If
you want to return to measurement mode, press CAL/MEAS.
(The values shown above are for illustration purpose. Your meter may display different
values depending on the settings & your environmental conditions)
Figure 24: View electrode
properties from mg/L
(ppm) SETUP mode
Checking electrode data
from mg/L (ppm)
SETUP mode
SETUP
p 4.0
ele
SETUP
1.000
el 1
mg/l
K=
SETUP
EL 2
39.2
mV
SETUP
EL 3
ENT
ER
EN TER
ENT
ER
- 0.1
mV