Techne 3PrimeG - Manual (Page 45)

44
Editing password protected programs
If the edited program is password protected, touching
Save will open the message box shown opposite. To
save the changes either:
• Touch the None button next to Password and enter
the correct password followed by Save.
Note: this will overwrite the existing program.
or
• Touch the None button next to New Program
Name and enter a new name for the edited
program, followed by Save as a New Program.
The re-named program will now be listed as a separate
program in the program list.
COPY
Program files can either be copied for editing, or to and
from the unit using a USB memory stick.
To copy a program file to the unit:
• Select a file to copy by touching to highlight it.
• Touch Copy.
A message box will confirm that the file has been
copied.
The copied file will now be highlighted and listed as
Copy of… and can be edited as required.