Techne 3PrimeG - Manual (Page 44)

43
• Touch Temperature log to view the block
temperatures. The previous two minutes of
temperature readings can be viewed by scrolling
across the screen using a finger.
Note: Touch Program View to return to the program
status.
EDIT
Editing existing programs
• First select the required program and touch Edit.
Any of the Program Options, Settings or thermal cycling
parameters can be edited.
• Once all the required changes have been made,
touch Save.
Note: this will overwrite the existing program.
Editing templates
Editing templates can be a quick method of creating a
program by just changing a few key parameters.
However it is not possible to save changes to the
templates installed on the thermal cycler.
If the edited program is a template, touching Save will
open the message box shown opposite.
• Touch the None button next to New Program
Name and enter a name for the edited program.
• Touch Save As New Program to save the changes.
The re-named program will now be listed in the program
list.