Techne 3PrimeG - Manual (Page 31)

30
If Auto Resume is set to Always and the power is
interrupted, on return of the power supply, a message
will be displayed on the screen giving details of when
the power was lost, when it was restored and the name
of the program running at the time.
• Touch OK to return to the Run Screen.
Date and Time Settings
Use these settings to set the current date, time and
date format on the unit.
• When set, touch Back to return to the Settings
menu.
Date
• Touch Set Date followed by the white date button in
order to enter the current date.
• Use the up and down keys to set the date values
(dd/mm/yy).
• When the correct date has been set, touch OK to
return to the previous screen.
• Touch Cancel to return to the previous screen if no
changes are required.
Time
• Touch Set Time followed by the white time button in
order to enter the current time using the 24 hour
clock.
• Use the up and down keys to set the time values (h,
m, s).
• When the correct time has been set, touch OK to
return to the previous screen.
• Touch Cancel to return to the previous screen if no
changes are required.
Date Format
Touch the date button to set the required date format.
The options are dd/mm/yy or mm/dd/yy.