C rs-485 communication network, Rs-485 communication network, Rs-485 overview – Spectrex 40/40I Triple IR (IR3) Flame Detector User Manual
Page 67: Figure 14: rs-485 networking, Crs-485 communication network, C.1 rs-485 overview
RS-485 Overview
55
C
RS-485 Communication Network
➣ In this appendix…
page 55
C.1
RS-485 Overview
By using the RS-485 network capability of the IR3detector and additional
software, it is possible to connect up to 32 detectors in an addressable
system with four (4) wires only (2 for power and 2 for communication).
Using repeaters, the number of detectors can be much larger (32 detectors
for each repeater) up to 247 on the same four (4) wires. When using the
RS-485 network, it is possible to read each detector status (FAULT,
WARNING, and ALARM) and to initiate a BIT to each detector individually.
For more details, consult Spectrex.
Figure 14: RS-485 Networking