SHIMPO TRC-Series - Manual (Page 3)

Never exceed torque ratings.
May damage sensor and other parts.
May cause damage or injury.
Place TRC in a location
where
maintenance and check are
easy.
Do not carry TRC by AC power cable.
May
cause electric shock, fire and/or injury.
Fix object securely.
May cause damage or injury.
Confirm the specified AC voltage.
Other then specified voltage may cause damage,
electric shock, fire and/or injury
Do not damage AC cable.
May cause electric shock, fire and/or injury.
Do not substitute AC adapter.
Use only
the adapter supplied with the
unit.
Use of other then specified ac adapter may cause
damage, electric shock, fire and/or injury.
Do not use except with 115VAC.
May cause electric shock, fire and/or injury.
Insert AC connector into outlet
securely.
May cause electric shock, fire and/or injury
Do not insert plug into AC
outlet
if hands are wet or moisture
is
present.
May cause electric shock, fire and/or
injury.
Do not alter, repair or dispose of
TRC or batteries improperly.
May
cause damage, accidents and void warranty.
Do not pull out the AC plug
by the
cable. Carefully pull on plug
only.
Pulling on cable may cause electric
shock.
Do not use with AC power in an
area
where there is dust.
An electrical spark may cause fire.
A
void the following.
Di
rect sunshine, condensation, dust or caustic
ch
emicals, combustible gases, oils, water, salts.
To clean, gently wipe with a soft
cloth.
No volatile chemicals such as usage of
Benzene,
Thinner, or Alcohol are to be used to clean
TRC
Operate within 32-104
° ° ° °
F (0-
40
° ° ° °C) C) C) C)
Outside specified temperature range
may alter
operation of TRC.
Check operation of TRC and
calibrate
periodically.
Humidity range 35
– – – –
85%RH
(Not condensation)
Operation outside humidity range may alter
operation of TRC.
Caution